24 08, 2015

1960 Ford F100-Dan D.

This is the ONLY one of these in the world. It all started with my passion for classic cars dating back over 30 years. I not only look at them as pieces of art but I also feel they are a piece of history that should be retained for future generations. When my life took an unexpected turn over 10 years ago causing me to use a wheelchair for mobility I tried not to let that slow me down. However there is one area that I found was lacking in accessibility is the classic car hobby. That is when I ... read more >>

20 08, 2015

1972 Chevy C10 – Vic L.

What started out as a put back together and sell turned into a full-blown restoration 2 years later. After beginning work on a 2 wheel dr. 68 Chevrolet, I came across my 72 4x4 in pieces down in Ft Walton Beach Florida and thus the journey began. I have never had a 4x4 in these models but had redone several 2 wheel drives. The frame had been sandblasted and powder coated when I got the truck so we began to start on its rebirth and 2 years later here is what we have. 95 % of the parts we ... read more >>

5 08, 2015

1971 Chevy C10 – Tanner B.

THE TYPICAL STORY OF IT WAS IN A FIELD ROTTING AWAY, I TRADED MY MOTORCYCLE FOR THE TRUCK. A FEW WEEKS LATER I GOT THE OPPORTUNITY TO DO A SEMA BUILD WITH THE TRUCK. THE RACE WAS ON... THEN I FOUND THE RUST... SOOOO MUCH RUST. INNER ROCKERS OUTTER ROCKERS CAB CORNERS, CAB BRACES, CAB FLOOR BED FLOOR, FENDERS, RUST FOR DAYS. AND AFTER A YEAR OF NIGHTS WEEKENDS AND MY SANITY THE ORIGINAL LONG WHEEL BASE IS NOW A SWB SITTING ON A FULLY CUSTOM FRAME Z'D 4" IN THE FRONT THE TRUCK IS AIR BAGGED AND BODY ... read more >>

28 07, 2015

1976 Ford F250-James L.

I saw this truck on Ebay Motors. Bought it for $7000.00 and paid a mobile Parking Lot $1000.00 to bring it to Toledo OH. First thing I had to replace the steering Rod that I got from LMC. Then the rear U-joint blew on the way to my ace mechanic. He welded the drive-shaft together and said it might need to be balanced. He said might be $600.00 for a replacement. Took it to Toledo Clutch & Brake, they said it was junk. Come back tomorrow. When I got there they gave me a brand new black drive-shaft for $100.00 ... read more >>

22 07, 2015

1972 Ford F250-Mark N.

Bought it early this spring after sitting in a barn for close to 20 years. The Ford has only 43,000 original miles. Had to drag it out because the brakes were all rusted in place. Did a complete brake job, Tune up and clean Fuel system, with a lot of parts from LMC Truck. Cleaned all the dust and dirt and had the original paint buffed to a better than new shine. It runs and drives perfectly.

14 07, 2015

1976 Ford F150-Kristen M.

When it became time for me to learn how to drive my mom would not let me use the family car for driving lessons. So my dad told me if I wanted to drive I would have to get the old '76 running to learn on. This old truck came into our family on a repo so we had no clue if it had any major problems or anything about it. It had been sitting in our yard for a while and I was up to the challenge of fixing the beast up. My dad help me with a couple ... read more >>

13 07, 2015

1951 Chevy-Lynn B.

This pickup was purchased together by my father and grandfather in 1952. It was used on their farm until the late 60's, at which time they both bought newer pickups. In the mid 70's my father had it painted and drove it until 1979, at which time he parked it in a small shed on the farm. It sat there for 23 years without running. In 2002 I was pulled out of the shed and began getting it into running shape once again. The paint is now 40 years old but shines up nice. It has 17000 miles on the ... read more >>

23 06, 2015

1975 Chevy K20 – Don S.

I purchased this truck back in 1977. I kept the truck 100% stock other than dual exhausts up until last year when I decided it was time to give it the makeover it deserved. With only 130,000 original miles, it was still a very solid truck and dependable truck. I started out thinking just a basic repaint. But as it usually happens, one thing led to another and I pretty much ended up redoing the truck inside and out, including stripping the undercarriage and repainting the bottom side, too. The truck turned out nicely and I had numerous inquiries ... read more >>

12 06, 2015

1996 Ford Bronco-Edward M.

I bought this truck in 2012 and have been piecing it together since then. It has been with the family through 2 separate military deployments and many ups and downs. The paint was in good shape for the age and all I had to do was some wet sanding and polishing. I have added a K & N cold air intake, new carpet, floor mats, roll bar, headlights, wheels and tires, 2 inch lift, grill, nerf bars, tail lights, and a performance chip. I never see this year of Bronco in any workable condition and receive complements often. ... read more >>

6 06, 2015

1975 GMC Jimmy – Michael F.

Ever since I was a little kid, I always thought the full convertible square body blazers and Jimmy were the coolest cars on the roads. It was rare if you ever saw one with its roof off driving on the road, but every now and then you'd come across one. I knew one day I would have one, so, on my 30th birthday, I went out and picked one up. She was just a rolling rust-free body when I got it, but one year and several paychecks later, my 75 Jimmy has become my dream truck! ... read more >>

5 06, 2015

1971 Chevy C10 – Kent M.

Hello LMC truck fans! Just wanted to share my finished 71' C10. Just needs windows tented and rhino lined bed. It's been a year and half project but all worth it! Couldn't of done it without LMC. I know there are other suppliers of parts out there, but I have never had an issue or wrong part from LMC, therefore, that's where I get all my parts. I sent this truck in not to long ago before it was finished as an in-process project and now I want to share the finished project. My first truck ever was dark ... read more >>

Load More Posts